Hit Enter to Search
EV-TEST100 EVSE Adapter for Electric Vehicle Charger Testing

EV-TEST100 EVSE Adapter for Electric Vehicle Charger Testing

Codmetel: HA0EV100

Inquire now
  • EV-TEST100 in combination with appropriate HT multifunction instrument simulates an electric vehicle connected to the charging station, allowing you to verify the EVSE full functionality and electrical safety. EV-TEST100 is able to test charging stations with charging modes 2 and 3 and Type 2 connector (European standard).

? Use for EVSE charging stations Charging modes 2 and 3
Test cable with connector Type 2 (IEC 62196-2)
Cosphi, Power Factor  
Vehicle simulation via Control Pilot (CP state) States A, B, C, D
Simulating the current capacity of Proximity Pilot (PP state) NC, 13A, 30A, 32A, 63A
Fault condition simulation on PE FAULT PE
Diode simulation in short circuit FAULT PE
EVSE internal counter efficiency check LOAD
Input voltage Max 415V AC, Phase-Phase, 50 / 60Hz
External load L-N-PE 240V 50/60Hz, Max 10A AC
CP signal PWM 12V
External load protection Fuse FF 10A / 250V, 5x20mm
Operating temperature 0°C ÷ 40°C
Operating humidity <80&RH