Hit Enter to Search
USD 080

USD 080

Ultra sonic fill level sensor USD 080

Inquire now
  • for contactless continuous fill level measurement in liquids and solid materials

  • measurement range up to 8m in liquids and up to 3,5m in solid materials

  • Four-line plain text display for menue controlled installation

  • Envelope curves illustration on the on-site display for simple diagnosis

  • Linearization for up to 32 points

  • Integrated temperature sensor for automatic correction of the temperature dependent sound velocity

  • Hart-protocol - 4...20mA, Profibus PA or Foundation Fieldbus

  • Certificated for the use in explosion hazardous areas - gas / dust

  • Measurement range up to 5m in liquids and 2m in solid materials

  • Rugged housing IP-68 in aluminum

  • Installation in screw-in threads from G 1½" or 1½" NPT upwards

Technichal data

Measuring range
: 8 m
Solids: 3,5 m

Blocking distance: 0.35 m
Deviation: ± 2 mm, or 0.2% of set measuring range (greater)
Resolution: 1 mm
Frequency: 50 kHz
Pulse: dep. the type of sensor (max. 0.5 Hz at 2 Hz 2-wire/max at 4-wire)
Min reaction time: 0.5 s at 4-wire, 2 s for 2-wire
3dB beam angle: 11°
Output: 4 .. 20 mA with HART protocol (standard), PROFIBUS PA, FOUNDATION Fieldbus (option)
Load: For HART communication minimum of 250 ohms
Installation: Perpendicular to the product surface
Ambient temperature: -40 ... +80°C
Protection: IP68, IP20 with open cover
Process connection: G 2" ISO 288
Side materials process: screw and sensor: PVDF, between thread and sensor
inside: EPDM seal Process temperature: -40 ... +80°C
Pabs process pressure: 0.7 ... 3 bar
Power supply: two wire: 14-36V DC, four-wire: 10.5-32V DC, 90-253 V AC 50/60 Hz
CE-mark: Prosonic meets the legal requirements of the EC directives.
Ex approvals: ATEX II ½ G, 2G EEx ia IIC T6, EEx d (ia) IIC T6, ATEX II ½ D, 1/3D, ATEX II 3G EEx nA II T6, ATEX II ½ D, 1/3D