Hit Enter to Search
Belt Alignment Switch STAINLESS STEEL HEAVY DUTY 35mm Short Roller

Belt Alignment Switch STAINLESS STEEL HEAVY DUTY 35mm Short Roller

Inquire now
  • The Python range of Conveyor Alignment Switches are housed in a rugged 316 stainless steel body.

  • The roller is also built from stainless steel and has a 35mm diameter and length of 120mm.

  • It is designed for use in heavy duty areas to maintain conveyor belt alignment and prevent belts running out of alignment and causing damage to both the line and products.

  • The steel roller of the switch is placed near to the running edge of the conveyor belt such that deflection of the roller and arm will cause activation “tripping” of the internal contacts of the switch.

  • Each switch contains two sets of contacts, one which indicates a warning signal (for maintenance purposes) and the other a stop signal, disconnecting the outputs and stopping the belt.


Features
Contacts: 2NC 2NO
Supply: 24V or 110V or 230V
Indication: With or without LED
Conduit Entry: M20 or 1/2″NPT fitting
Operating Torque: 3.0 – 5.0Nm
Warning Signal: 10 – 18 degrees
Stop Initiated: 15-35 degrees
Ingress Protection: IP67
ATEX Versions Available