The CS3 is an extremely rugged joystick in an ultra-compact and versatile design. The durable housing and center pivot design make this device resistant to abuse and ideally suited for high duty cycle applications.
Inquire now1, 2 and 3 axis control is available as well as a variety of standard and custom handles and grips with push buttons and levers.
Both separate and simultaneous operation of each is achieved with standard gate patterns.
Compact and rugged construction design
Proprietary blend, ultra-tough boot
Environmentally sealed mounting and corrosion resistant components
Smooth high-life non-biasing compression style spring return
Single and dual axis operation
Long life Hall-effect technology
Meets or exceeds CE EMC requirements
Conformal coated electronics to resist moisture
| General Data | |
| # of Axis | Single, Dual or Three (Third axis is achieved via a twist handle function or thumbwheel.) |
| Output Options | Hall-Effect, CANOpen, Basic CAN, J1939 and 4-20mA |
| Joystick Action | Spring Return |
| Handle Travel | +/- 20 degrees each axis |
| Gate | Open or Cross |
| Handle Compatibility | Round Ball, BH, RH, RHS, FG-3, FG-4, FG-5, G58, MG1, MG13, MG27 and TH30 |
| Life | 20 million plus cycles |
| Materials | High strength, glass filled nylon housing. |
| Est. Shipping Weight | 2 lbs. |
| Est. Shipping Dimensions | 8 in. x 8 in. x 8 in. |
| CAN Specifications | |
| Protocols | CANOpen, J1939 or Basic CAN |
| Inputs and Outputs | 4 analog inputs; 8 digital inputs; 2 digital outputs |
| Additional Information | See complete listing of CANbus technical data in ESS408 CAN Based Interface Module Board literature |
| Electrical Data | |
| Hall-Effect Specifications | Supply Voltage: 4.5 to 5.5 VDC; Output Voltage: Ratiometric 0.5 - 2.5 - 4.5 +/- 0.15V @ 5.0V supply; Additional supply and output options available; Output Current: 10 mA; Power Consumption: 20 mA at full load; Termination: 20 AWG wire 6 inch leads with mini-fit connector |
| EMC Emissions | Complies with EN61000-6-4:2007 Class A Group 1, 80-1000 MHz |
| EMC Immunity | Complies with or exceeds EN61000-6-2:2005, expanded to include RFI Immunity of 100 V/M at 80-1000 MHz and ESD Immunity of 15 kV air, 8 kV contact |
| Applications |
| The CS3 is often used in mobile equipment applications where reliability and a high level of functionality are required. Typical applications include: On and Off highway mobile equipment Scissor lifts, boom lifts & aerial work platforms Construction & agricultural machinery Road maintenance & refuse vehicles Boats and marine equipment And more |
| Mounting Data | |
| Mounting Style | Drop-in or Panel (From Below) |
| Mounting Footprint | 2.76 x 2.76 in Panel mount; 3.54 x 3.54 in Drop-in mount; See literature for additional mounting specifications |
| Environmental Data | |
| IP Rating | IP54 |
| Operating Temperature | -13 to +158 degrees F [-25 to +70 degrees C] |
| Storage Temperature | -40 to +158 degrees F [-40 to +70 degrees C] |