The HS-SS-Z is part of the new Z-Range intelligent series of safety products. They have been designed to be mounted for interlock position sensing of hinged moving guards.
The Z-Range technology means up to 30 HS-SS-Z can be connected in series, maintaining a high level of functional safety.
Due to the pulsed OSSD outputs, faults are detected immediately and displayed either on the switch, or through the auxiliary output.
The HS-SS-Z can be adjusted upon installation to provide guard-open output signal anywhere between 0 to 10 degrees.
They are factory set to provide the guard open output signal at 3 degrees.
Once set during installation the HS-SS-Z is permanently pinned in order to provide a fully tamper-resistant switching point.
| Features | |
| Housing: Mirror Polish (Ra4), 316 stainless steel | |
| Axial Holding Force: 800N | |
| Contacts: 2 OSSD Outputs and 1 N/O Auxiliary Output | |
| Ingress Protection: IP69K | |
| Operating Temperature: -25c to +80c | |
| Connectivity: Pre-wired or M12 8-Pole Quick Connect | |
| Mounting is achieved by fixing the switch from underneath for improved hygienic qualities. If you need front fixing, separate mounting bracket accessories can be purchased. | |
| Blank hinges are also available if your requirement is for 2 hinges per door. | |
| Left or right versions available | |