Moisture meter for the determination of moisture in waste paper / recycling paper and for the detection of moisture spots in recycling paper bales.
Measurement of compressed bales, roles and pulp possible. Measuring range of 1 to 50% water content, measuring depth 500mm. Furthermore it is possible to connect external sensors to the humimeter RP6.
Use the optionally available humidity and temperature sensor to measure environmental parameters and many other important paper key figures quickly and efficiently.
To measure loose paper or cardboard, use the optionally available 0.3 meter long insertion probe.
| FEATURES |
Measuring range: 1 to 50% water content (depending on the material)
Resolution: 0.5% water content
Measuring depth: max. 500mm
Operation temperature: 0 to +50°C / 32 to 122°F
Automatic temperature compensation
Temperature can be set to °C und °F as required
Measurement within seconds without prior treatment of samples
Hold function, automatic datalog for up to 10,000 logs with measuring point report
Interface for the connection of further external sensors
Menu languages: English, German, Italian, French, Spanish, Russian, many others on request
Protection class: IP64
Scope of supply: humimeter RP6, humimeter USB data interface module with LogMemorizer measuring data recording and analysing software on USB flash drive incl. USB cable for PC, rechargeable batteries (Li-Ion 1950mAh) and plastic case
Optional: portable thermo printer, humidity and temperature sensor, test medium
| EXTENDED ACCESSORIES | |
| Art. No. | Extended accessories |
| 11733 | Thermo printer runs by battery, industrial model, portable |
| 13340 | Internal Bluetooth class 1, integrated module class 1 (up to 100 metres) for humimeter devices. Combinable with USB interface. |
| 13837 | Insertion probe with stainless steel probe of 0.3 meter length for recycling paper and corrugated board |
| 12004 | LF_TB 120 Precision moisture and temperature plug-in sensor for material moisture, sensor head 0.3 m stainless tube with steel sinter cap and 2 meter connection cable. Relative humidity 0 to 100%, calibration 10 to 90% r.h. +/- 1.5% r.h. (at 23°C), temperature range -20 to +100°C, calibration +/- 0.3°C (at 235°C), rapid conditioning |
| 10726 | Test medium for humimeter RP6 moisture meter for recycling paper |
| 10600 | Test plate in wooden case for additional checking of humimeter RP6 (additionally to standard check via air value) |
| Your benefits |
Quickly and highly accurate measurement using a non-destructive method
Digital displaying in “%” water content (weight percentage)
Simple handling of moisture meter
Pre-programmed calibration for different materials and bale densities
Handy, applicable everywhere on site
Menu languages: English, German, Italian, French, Spanish, Russian and many others on request
Art.Nr.: 13300 humimeter RP6 moisture meter for recycling paper / waste paper
| Measuring procedure |
Start your humimeter RP6 by pushing the black button on the handle of the device. Choose the right calibration curve (e.g. 350 recycling paper) and press the measuring plate against the waste paper bale. The display immediately shows the water content and temperature. Now additional information like supplier’s data and notes can be added. The measuring values can be stored at the humimeter RP6 and sent to a PC if required.
Furthermore the measuring results can be printed out on the spot via the optionally available portable thermo printer. For the determination of many other relevant process parameters, a humidity and temperature sensor can be connected.