The peristaltic pump is controlled by 2 thermal probes. When the temperature difference reaches 6 °C, the pump runs. It stops 3 minutes after the temperature difference is fallen below 6 °C. This pump must not be used in continuously run.
Inquire nowHigh performance
Compact design
IP65 protection allows installation without ventilation
Low noise level
Its replaceable head and easy access tube reduce maintenance costs
| Technical details | |
| Max flow rate | 1 gph 6 l/h |
| Max discharge head | 1 ft 12 m |
| Max suction head | 1 feet 2 m |
| Insulation class | Double insulation |
| Mains supply | 230V~ 50Hz - 11 W |
| Protection | IP65 |
| Master pack quantity | 16 |
| Detection | Cooling signal |
PE5000 pump
Cable: 1.7 m, including 2 wires for power supply (P &N), 1 wire for compressor signal.
Easy "1 screw" sliding plastic bracket
Ø 15 mm to Ø 6 mm adaptor + pale yellow rubber (Ø 15 x 35mm) - (PE5003)
| Pump Dimensions | |
| Pump | |
| Length | 109 mm |
| Width | 110 mm |
| Height | 91 mm |
| SOUND LEVELS | |
| at 3,3ft or 1m in application (dBA) | ≤ 30.00 |
| Safety standards |
| CE |
| EAC |
| ROHS and WEE directives |
| Compliant |