Peristaltic pumps* help lift charged condensates. Among the most compact on the market, they combine silence with a practical and clever design. Their detachable and replaceable head and tube ensure optimised maintenance and cost. The PE-5200 is controlled by a remote detection unit fitted with a three level float. * These pumps must not operate continuously.
Inquire nowSmall size
Very silent operation
Safety alarm
Large discharge head
Detachable and replaceable heads and tubes
| Technical details | |
| Max flow rate | 1 gph 6 l/h |
| Max discharge head | 1 ft 12 m |
| Max suction head | 1 feet 2 m |
| Insulation class | Double insulation |
| Mains supply | 230V~ 50Hz - 11 W |
| Protection | IP65 |
| Master pack quantity | 16 |
| Detection | Float sensor |
Peristaltic pump PE 5200
Cable: 1,7 m, including 2 wires for power supply (P &N).
2 safety switch wires (1,7 m)
Easy "1 screw" sliding plastic bracket
Detection unit (SI2958, 1.5m cable)
Detection unit installation kit: Pale yellow rubber (Ø 15 x 35mm). Vent tube Øint 4 x L 75 mm. Mounting rail. Adhesive
| Pump Dimensions | ||
| Pump | ||
| Length | 109 mm | |
| Width | 110 mm | |
| Height | 91 mm | |
| SOUND LEVELS | |
| at 3,3ft or 1m in application (dBA) | ≤ 30.00 |
| Safety standards |
| CE |
| EAC |