A manostat is a pressure gauge which has a switch inside its casing. At a selected pressure the switch activates an electrical contact and stops the machine on which it is wired. Kimo’s PST is used to control pressure.
Inquire nowMeasuring ranges: PST 11: -100 to +100 Pa with EV, PST 12: -1,000 to +1,000 Pa, PST 13: -10,000 to +10,000 Pa, PST 14: -500 to +500 mbar, and PST 15: -2,000 to +2,000 mbar
10-digit LCD display
One RCR relay 3A/230 Vac
Red LED in front
Software or DIP switch configuration
Quick and easy mounting with the 1/4 turn system with wall-mount plate
| MEASURE DETAILS | |
| Units | Pa, PSI, kPa, mbar, hPa, inWg, mmH2O, mmHg, daPa |
| Alarm | Red led in front and internal buzzer (70 dB at 10 cm) |
| TECHNICAL DETAILS | |
| Parameters | Differential pressure |
| Displays | 1-line display |
| IP Protection | IP 65 |
| Standards | 2011/65/EU RoHS II 2012/19/EU WEEE 2014/30/EU EMC 2014/35/EU Low Voltage |
| Power supply | 24 Vac/Vdc ±10% |
| Relay | 1 RCR relay 3 A / 230 VAC |
| Ethernet communication | No |
| Modbus network | No |
| INSTRUMENT DIMENSIONS | |
| Length | 90 mm |
| Width | 46 mm |
| Height | 109 mm |
| Weight | 143 g |
| OPERATING TEMPERATURE | |
| Min | 0.00 °C |
| Max | 50.00 °C |
| STORAGE TEMPERATURE | |
| Min | -10.00 °C |
| Max | 70.00 °C |