This peristaltic condensate pump is designed for all types of air conditioners up to 8 kW: wall units, air conditioning cabinets, ceiling units and ducted units.
Equipped with two remote temperature sensors, the Si-51 activates when the temperature difference between the air entering and leaving the air conditioner exceeds 6 °C. The pump continues to run for 4 minutes when the temperature difference falls below 6 °C.
Ideal applications:
• Businesses and industries with high levels of dust (bakeries, etc.) and chemicals (hairdressers, etc.)
• Hotels (maintenance possible without accessing the rooms)
Important: the Si-51 is incompatible with reversible and inverter systems as it must not be used in continuous operation.
High performance
Easy installation
Extended reliability
Quick maintenance
| Technical Details | |
| Max flow rate | 6 l/h |
| Max discharge head | 12 m |
| Max suction head | 2 m |
| Mains supply | 230 V~ 50/60 Hz - 8 W |
| Protection | IP55 |
| Master pack quantity | 16 |
| Detection | Temperature differential |
| Pump Dimensions | |||
| Length | Width | Height | |
|---|---|---|---|
| Pump | 85 mm | 108 mm | 122 mm |
1 Peristaltic pump Si-51
1 Cable: 1.7 m, including 2 wires for power supply (P & N)
2 thermal probes with 3.5 m cable: - Red cap for ambient air - Blue cap for fresh air
1 Easy 2-screw sliding plastic bracket
1 Ø 15 mm to Ø 6 mm adaptor + sleeve (Ø 15 x 35 mm) - (ACC00927)
| Storage Temperature | |
| Min | 2.00 °C |
| Max | 45.00 °C |
| Operating Temperature | |
| Min | 2.00 °C |
| Max | 45.00 °C |
| Safety standards |
| CE |
| UKCA |
| ROHS and WEEE directives |
| Compliant |