The flush-mount displays Si-ATE320 are a good solution to integrate the visualisation of the parameters measured by other sensors/transmitters into a single display device and, simultaneously, transfer these measurements to a BMS or Scada through modbus RTU.
Inquire nowDisplay of 1 to 3 parameters
Visual and acoustic alarms
Graphic Touch display
RS485 MODBUS protocol communication
IP 66, VHP resistant
30 pre-programmed units and custom units
| Measure Details | |
| Units | ACH, dam³/h, fps, inWc, ppb, °Ctf, °F, °Ftf, °C, % RH, °Ctw, °Ctd, °Ftd, °Ftw, Pa, m³/s, PSI, kPa, ppm, g/m³, g/kg, kj/kg, m/s, mbar, l/s, hPa, m³/h, mmH?O, mmHg, daPa, cfm |
| Alarm | Buzzer (60 dB at 10 cm) |
| Technical Details | |
| Parameters | Air velocity, CO, VOC, CO?, Differential pressure, Relative humidity, Temperature |
| Displays | Graphic touch display |
| IP Protection | IP 66, VHP resistant (Vaporized hydrogen peroxide) |
| Standards | 2015/863 EU (RoHS 3), UKCA, 2012/19/EU WEEE, 2014/30/EU EMC, 2014/35/EU Low Voltage |
| Power supply | 24 VAC / VDC ±10% |
| Ethernet communication | No |
| ModBus network | Yes |
1 Si-ATE320
1 Quick Start Guide
1 RS485 interface with ModBus RTU protocol
Terminal blocks for power connection
| Instrument Dimensions | |
| Value | |
|---|---|
| Length | 3 15/16 inches / 100 mm |
| Width | 1 27/32 inches / 47 mm |
| Height | 9 7/32 inches / 234 mm |
| Weight | 1 17/32 pounds / 700 g |
| Operating Temperature | |
| Min | 0.00 °C |
| Max | 50.00 °C |
| Storage Temperature | |
| Min | -10.00 °C |
| Max | 70.00 °C |